Data Summary




Pennsylvania Western Lidar 2020 QL1; Breaklines - North

2020 - U S Geological Survey


|



API
n/a




ADDITIONAL RESOURCES
n/a




ABSTRACT
Breakline data is used to hydroflatten the DEMs created for the PA_WesternPA_2019_D20 Lidar QL1 project. Breaklines are reviewed against LiDAR intensity imagery to verify completeness of capture. Geographic Extent: 2 counties in Pennsylvania, covering approximately 62 total square miles. Dataset Description: The PA_WesternPA_2019_D20 Lidar QL1 project called for the planning, acquisition, processing, and derivative products of lidar data to be collected at a nominal pulse spacing (NPS) of 0.35 meters. Project specifications are based on the U.S. Geological Survey National Geospatial Program Base LiDAR Specification, Version 2.1. The data were developed based on a horizontal projection/datum of NAD 1983 2011 StatePlane Pennsylvania North FIPS 3701 Ft US, Foot US and vertical datum of NAVD88 Geoid 12b, Foot US. LiDAR data were delivered as processed Classified LAS 1.4 files formatted to 114 individual 5,000 ft x 5,000 ft tiles and as tiled intensity imagery, and tiled bare earth DEMs formatted to 40 10,000 ft x 10,000 ft tiles. Continuous breaklines were produced in Esri file geodatabase format. Ground Conditions: LiDAR was collected in spring 2020, while no snow was on the ground and rivers were at or below normal levels. In order to post process the LiDAR data to meet task order specifications and meet ASPRS vertical accuracy guidelines, NV5 Geospatial, powered by Quantum Spatial utilized a total of 274 ground control points that were used to calibrate the LiDAR to known ground locations established throughout the project area. An additional 485 independent accuracy checkpoints, 291 in Bare Earth and Urban landcovers (291 NVA points), 194 in Tall Weeds categories (194 VVA points), were used to assess the vertical accuracy of the data. These checkpoints were not used to calibrate or post process the data.